Washing Machine Repair: Has No Power

Common Causes, Troubleshooting & Fixes

A washing machine that won’t turn on can be incredibly frustrating—especially when you have laundry piling up. If your washing machine shows no power at all—no lights, no display, no sound—don’t panic. This is a common issue, and in many cases, you can diagnose it yourself before calling a technician.

In this article, we’ll explore the possible causes, step-by-step troubleshooting, and professional repair advice for when your washing machine has no power.

🔍 Symptoms of “No Power” Issue

• Machine is completely unresponsive

• No lights or indicators turn on

• Display is blank

• No sound, no click, no hum

• Buttons don’t work

These symptoms confirm that your washing machine is not receiving any electrical power or is unable to process it internally.

⚠️ Common Causes & How to Fix Them

1. Faulty Power Supply

Problem: The socket or power outlet your washing machine is plugged into may not be working.

Solution:

• Unplug the washer and test the outlet using another appliance.

• Plug the machine into a different socket that you know is working.

• Avoid using extension cords, as they may be faulty or not provide enough power.

If the socket is the issue, consult an electrician to fix the wiring or circuit.

2. Damaged Power Cord or Plug

Problem: The machine’s power cord may be frayed, cut, or internally damaged.

Solution:

• Check the entire length of the cord for cuts, burns, or exposed wires.

• Make sure the plug is firmly connected.

• If you see damage or the cord gets hot during use, replace it immediately.

A damaged power cord is a fire hazard and should not be ignored.

3. Tripped Circuit Breaker or Blown Fuse

Problem: The power circuit supplying the washer may have tripped or blown due to overload or short circuit.

Solution:

• Check your home’s main circuit breaker or fuse box.

• Reset any tripped breakers or replace blown fuses.

• If the washer trips the breaker every time, call a professional to inspect internal components.

4. Internal Fuse Burned Out

Problem: Some washers have internal fuses or thermal cut-offs to protect the electronics. These can blow during a surge or internal fault.

Solution:

• A technician will need to open the washer and test the internal fuse with a multimeter.

• If the fuse is blown, it must be replaced.

• Ensure the root cause (like a surge or short) is addressed to prevent recurrence.

5. Control Board (PCB) Failure

Problem: The main control board, also known as the PCB (Printed Circuit Board), is the brain of your washer. If it’s burned or shorted, nothing will work.

Solution:

• A technician should inspect the PCB for burn marks or damage.

• The board may be repaired if only one component is faulty, or it may need replacement.

• PCB replacements can be expensive, so consider repair if possible.

6. Door Not Closed Properly

Problem: Most washing machines have safety interlocks that prevent operation if the door isn’t closed correctly.

Solution:

• Open and firmly close the door again.

• Check if the latch clicks in place.

• If the door lock or latch is broken, it may need to be replaced.

Pro tip: Front-load machines are more prone to door lock issues.

7. Child Lock or Control Lock Activated

Problem: Many washers have a child lock that disables controls and gives the illusion of no power.

Solution:

• Refer to your user manual to deactivate the child lock.

• Usually, pressing and holding a combination of buttons (like “Temp + Spin”) for 3–5 seconds will disable it.

• Look for a padlock icon on the display.

8. Low Voltage or Power Fluctuation

Problem: In some regions, low voltage or voltage spikes can prevent the washer from powering on.

Solution:

• Use a voltage stabilizer for protection.

• Avoid using during storms or known power fluctuations.

• If low voltage is common, consult your utility provider.

9. On/Off Button Failure

Problem: If the power button is damaged or the internal contact is loose, it may not trigger the machine to start.

Solution:

• Check if the button feels loose or doesn’t click properly.

• A technician can test the button’s continuity with a multimeter.

• Replace the button if faulty.

👨‍🔧 When to Call a Technician

While you can do basic checks yourself, call a professional if:

• Power cord or PCB needs replacement

• Internal fuse is blown

• Machine smells like something burned

• No tools or experience with electrical repairs

• Machine keeps shutting down or tripping the breaker

🧰 Preventive Tips

• Avoid using cheap or long extension cords.

• Unplug the washer during lightning storms or long vacations.

• Regularly inspect the plug, cord, and socket.

• Use a surge protector or stabilizer.

• Don’t slam the door or overload the machine.

• Schedule annual servicing.

🔧 Real-World Example

Customer Case:
A client in Abu Dhabi reported a Samsung front-load washing machine showing no signs of life. We performed the following:

• Tested the wall socket (working fine)

• Inspected and replaced the burnt power cord

• Replaced the blown thermal fuse

• Machine powered on and worked perfectly after repair

Total repair time: 45 minutes. The client avoided buying a new machine and saved AED 900+.

📞 Need Help?

If you’re located in Abu Dhabi and your washing machine has no power or any other issue, we’re just a call away! Our professional technicians offer fast, affordable, and reliable repair services at your doorstep.

✅ Quick response
✅ Affordable rates
✅ Genuine parts
✅ Warranty-backed service

📱 Call or WhatsApp: 0543471363
🌐 Website: acfridgewashingmachinerepairabudhabi.com

🧼 Final Thoughts

A washing machine with no power doesn’t always mean a dead machine. In many cases, it’s something simple—like a tripped breaker or loose plug. Understanding how to diagnose the issue can save you time, stress, and money.

If the issue is beyond your control, don’t hesitate to contact a professional. With timely repair, your washing machine can serve you well for many more years.